Just a little recap on what I covered in the last article:
• Drum Anatomy
• Equipment needed
• Drum Head Selection.
In this part we will be looking at preparing your drums to be tuned, and drum key technique.
Once you have your new drum heads just re tuning your kit it’s a good idea to get the hoops and heads of and just start from scratch. There is a way of removing the heads so you don’t warp or damage the drum. This can occur when there is too much pressure placed on a particular side of the drum, which can pull and distort the wood out of place. Below is a diagram of the correct technique for releasing the pressure created by the tight drum head.
The idea is that you work in opposites around the drum using your drum key (pictured below) to slowly loosen the head at each point. (turning to the left)